The Aputure STORM 700x utilises the BLAIR (Blue/Lime/Amber/Indigo/Red) tuneable white engine, delivering the highest quality white light and greatest +/- green adjustability of any LED technology.

The revolutionary BLAIR light engine can also output saturated colours across more than 70% of Rec.2020 colour space using Limited HSIC+ and x,y control modes. Achieve deep crimson sunsets, rich sodium vapour ambers, and subtle colour effects without gels.

The STORM 700x is brighter than any other point source LED light in its power range, weighs just 5.15kg, and can mount on either a baby or junior stand. Skid base also available on request allowing you to place the fixture on a flat surface with the reflector attached.

The CF10 Fresnel is slim and lightweight with an adjustable beam angle from 40° flood down to a 15° spot with the spot setting also increasing overall output of approximately 1-stop

Kit includes:

1x STORM 700x Head

1x Yoke with 1-1/8″ Junior Pin and 5/8″ Receiver

1x Control Unit with Lightning clamp to secure to stand if required

1x 35º Hyper Reflector

1x rolling case for Head & Control Unit, cables etc

1x weatherproof 5M head cable

1x 6M mains power cable

1x CF10 Fresnel with Barn Doors, safety cable & carry case

1x C-Stand (no grip head/arm)

Specifications:

Output: With included 35° Hyper Reflector –  5600K at 3M 18,670 Lux, at 5M 5390 Lux

Power source: Mains-powered (can also be powered on location with our EcoFlow lithium power banks – enquire with us for run times if this is required)

Colour Temperature range: 2500K – 10,000K (in CCT Mode)

Accessory Mount: Bowens S-Type

Mounting: 360º yoke with combination 1-1/8″ Stud and 5/8″ Receiver

Dimming: Yes 0-100%

Wireless Control: Yes via Sidus Link Pro App for iOS or Android & DMX

DMX connection: 1x XLR 5-Pin DMX Input, 1x XLR 5-Pin DMX Output
1x XLR 5-Pin DMX Output

Weight: Head only: 5.15kg (Fixture with Yoke),  Controller: 4.1kg, whole kit including case: approx 19kg. The CF10/Barn Doors/Case weigh 6.5kg

Barn Doors: Scrim or gel frame insert on front side (57cm/22″ diameter)